Carlisle R2+ R-15.3 2.5"X4'X8' Matte Ctd Glassfaced Iso
Part #CARLISLE R2M 2548
Product Description
4' x 8', 2.5" Thick, 20/25 PSI, R15.3, 1.5 to 2.5 PCF, Light Yellow, Closed Cell Polyisocyanurate Foam Core, Matte Coated Glass Facer, Square Edge, Rigid Foam Insulation Board (19 per Pallet)
- Brand:Â CarlisleMaterial:Â Closed Cell Polyisocyanurate Foam Core, Matte Coated Glass FacerRoll/Sheet Dimensions:Â 4 Foot x 8 Foot
- R-Value 15.3; Edge Treatment Square; Water Absorption 0.1 Percent; Water Vapor Permeance 1; Compressive Strength 20 to 25 PSI; Flame Spread 75; Smoke Developed 450; Grade 20/25 PSI; Physical State Solid; Odor Slight; Packaging Type Polyethylene Bag
- Tough Coated-Glass Facer Resist Damage During Construction; High R-Value Per Inch - Enable Thinner Board to be Used, While Still Meeting Code Requirement; Non-Reflective Facer - No Glare During Exposure; Factory-Controlled Thickness and Composition; No Special Tools or Equipment Required for Installation - Lightweight, Easy to Handle, Cuts with a Knife or Saw
- Rigid Foam Insulation Board; Insulation Thickness 2.5 Inch; Roll/Sheet Dimensions 4 Foot x 8 Foot; Material Closed Cell Polyisocyanurate Foam Core, Matte Coated Glass Facer; Density 1.5 to 2.5 Pound per Cubic Foot; Color Light Yellow; Maximum Temperature Rating 250 Deg F; Minimum Temperature Rating -100 Deg F; Application Commercial, Above Grade Wall; Applicable Standard ASHRAE, NFPA 285; R-Value 15.3; Edge Treatment Square; Water Absorption 0.1 Percent; Water Vapor Permeance 1; Compressive Strength 20 to 25 PSI; Flame Spread 75; Smoke Developed 450; Grade 20/25 PSI; Physical State Solid; Odor Slight; Packaging Type Polyethylene Bag
- R2+ MATTE is a rigid foam insulation board designed for use in commercial construction above-grade wall applications to provide continuous, high R-value insulation. The product is composed of a closed-cell polyisocyanurate foam core bonded on both sides to a coated glass facer. R2+ MATTE can be installed on the exterior or the interior side of the wall assembly. R2+MATTE is offered in different thicknesses, sizes and foam core densities. It is secured in place with fasteners, adhesive or a combination of the two. Installation technique depends on the wall assembly. R2+ MATTE has been fire-tested to NFPA 285 and passes this tough test in many wall assemblies. CCW provides R2+ MATTE insulation, R2+ accessories and CCW air/vapor barrier membranes for a complete wall weatherization system.