Carlisle Barriseal-R Rollable Vapor Air/Bar 5 Gal Pl
Part #CARLISLE BSR 5
Product Description
5 Gallon Pail, 212 Deg F Boiling Point, Synthetic Polymer, Asphalt Odor, Liquid, 1-Part, Water Based Asphalt Emulsion, Fluid/Cold Applied, Dark Brown Uncured/Black Cured Barriseal®-R Air and Vapor Barrier Membrane
- Brand: CarlisleItem: Air and Vapor Barrier Membrane
- Type 1-Part, Water Based Asphalt Emulsion, Fluid/Cold Applied; Container Capacity 5 Gallon Pail; Temperature Rating -20 to 149 Deg F (Service); Color Dark Brown (Uncured), Black (Cured); Material Synthetic Polymer; Physical State Liquid; Odor Asphalt; Boiling Point 212 Deg F; Density 1.031; Coverage Area 25 Square Foot per Gallon; VOC Content Less than 20 Gram per Liter; pH Value 10 to 11; Application Air and Vapor Barrier; Applicable Standard ASTM D412/D903/C1305/C1522/D4541/D5329/E96/E283/E330/E331/E2178/E2357
- 1-Part, Cold-Applied, Roller Installation - Simple Procedure with No Special Tools or Equipment; Effectively Coats Rough and Porous Surface; High Water Resistance of Cured Membrane Permits Use in High Moisture Exposure Areas; Non-flammable and Fume-Free Composition Provides Safe Installation; Monolithic Coverage and Self-Sealing Properties Provide an Air- and Water-Tight Installation Around Fasteners; Barriseal-R is a Warranted Air/Vapor Barrier System from Carlisle Coatings and Waterproofing
- Air and Vapor Barrier Membrane; Item Air and Vapor Barrier Membrane; Type 1-Part, Water Based Asphalt Emulsion, Fluid/Cold Applied; Container Capacity 5 Gallon Pail; Temperature Rating -20 to 149 Deg F (Service); Color Dark Brown (Uncured), Black (Cured); Material Synthetic Polymer; Physical State Liquid; Odor Asphalt; Boiling Point 212 Deg F; Density 1.031; Coverage Area 25 Square Foot per Gallon; VOC Content Less than 20 Gram per Liter; pH Value 10 to 11; Application Air and Vapor Barrier; Applicable Standard ASTM D412/D903/C1305/C1522/D4541/D5329/E96/E283/E330/E331/E2178/E2357
- Barriseal-R is a water-based asphalt emulsion modified with a blend of synthetic polymers and special additives. Barriseal-R is formulated to a thick consistency, so it will hang easily on vertical surfaces at high thickness. Barriseal-R is often used as an accessory product in the Barriseal-S spray-applied air and vapor barrier system. Barriseal-R can also be used as the principle membrane and by itself performs as an air barrier, vapor barrier and waterproof membrane. Barriseal-R is applied by roller or brush, to achieve a nominal 0.040" (40-mil) dry film thickness. Barriseal-R can be applied over concrete block, concrete, exterior gypsum sheathing, foam insulation board, plywood, OSB and many other common building materials. The product is fully adhered to the substrate, flexible and rubber-like. The high film thickness and flexible, elastic properties enable Barriseal-R to bridge cracks and seal around penetrations, which creates a truly continuous, monolithic air, vapor and water barrier.