Temperature Rating: 20 to 110 Deg F (Application), 40 to 200 Deg F (Service)
Type: Liquid Flashing and Detail Sealant
Thickness 40 Mil (Wet), 39 Mil (Dry); Physical State Paste Liquid; Odor Mint Like; Material Silane Terminated Polyether; VOC Content 28 Gram per Liter
Highly Thixotropic Behavior: Neat Installation, No Slumping or Dripping, Easy to Trowel Smooth; High Solids: 1-Coat Application, Fills Cracks and Gaps up to 1 Inch (25.4 MM) Wide, Virtually No Shrinkage after Cure; Flexible and Elastic: Forms a Tough, Durable and Seamless Coating at Critical Detail; Rapid Cure: Resists Rain within Minutes of Application, Resistant to Standing Water after Cure; User-Friendly: Compatible with Many Common Construction Material and CCW Air Barrier; Can be Applied over Damp Concrete and Masonry Substrate; Low VOC, Low Odor; No Shrinkage or Staining; Resistant to Organic Growth
Liquid Flashing and Detail Sealant; Type Liquid Flashing and Detail Sealant; Container Type Sausage; Container Capacity 20 Fluid Ounce; Color Blue-Gray; Setting Time 40 Mil (Membrane), 45 Minute (Tack Free), 15 Minute (Open); Pressure Rating 200 PSI; Temperature Rating 20 to 110 Deg F (Application), 40 to 200 Deg F (Service); Application Substrate Preparation; Applicable Standard AAMA 714-15, Type S, Grade NS, Class 25, Use NT per ASTM C920/D412/C1305/C661 Standard Specification; Thickness 40 Mil (Wet), 39 Mil (Dry); Physical State Paste Liquid; Odor Mint Like; Material Silane Terminated Polyether; VOC Content 28 Gram per Liter
BarriBondXL is a high-solids, silane-terminated polyether (STPE) based compound designed for detailing rough openings, penetrations, sheathing joints, countersunk screws, transitions, angle changes, and other critical details encountered in CCW Fluid-Applied Air Barrier Systems. BarriBondXL can also be used as a termination mastic over CCW Self-Adhered Sheet Flashing Membranes. BarriBondXL is a single-component, moisture-cured adhesive/sealant which is applied from a sausage caulking gun, then smoothed in place with a trowel or squeegee. BarriBondXL is offered in a signature blue-gray color for easy identification in warranted CCW Air Barrier Systems. The product is formulated for clean, easy application over horizontal, vertical, and inverted surfaces.