3M Cp-25 Wb+ Fire Barr Ltx Caulk 5 Gal Pail Red
Part #3MF 11640
Product Description
5 Gallon Drum, 100 Deg C Boiling Point, Solid/Paste, Water Based, Red Fire Barrier Sealant
- Brand: 3MApplicable Standard: UL, CAN/ULC S115, FM, ASTM E814/E1966, IBC, IRC, IFC, IPC, IMC, NEC, NFPA 70/101/5000Application: HVAC Duct and Vent, Metallic and Non-Metallic Pipe, Blank Opening, Single and Bundled Cable, Insulated Pipe, Pipe and Cable Through Penetration, Busway, Combo, Rated Wall, Floor and Floor Ceiling Assembly, Static Construction JointColor: RedContainer Capacity: 5 GallonContainer Type: DrumTemperature Rating: 40 to 122 Deg F (Application), -20 to 180 Deg F (Service)Type: Water Based
- Physical State Solid; Physical Form Paste; pH Value 7.5 to 8; Boiling Point 100 Deg C; Evaporation Rate 0.33; Specific Gravity 1.35; Surface Burning Characteristic Flame Spread 0, Smoke Development 0; Hardness 45; Tensile Strength 85 PSI; Volume Shrinkage 28 Percent
- Firestop Tested for through Penetration Applications up to 4 Hours in Accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; Sag-Resistant Properties Offer Clean Application as Well as Strong Adhesion in Both Wall and Floor Applications; Water Based and Paintable Sealant Provides Easy Application and Clean-Up; Sealant is Re-Enterable and Repairable; Fire Resistance Tested for Static Construction Joint Systems in Accordance with ASTM E1966 (UL 2079); Sealant Helps Minimize Sound Transfer
- Fire Barrier Sealant; Type Water Based; Container Type Drum; Container Capacity 5 Gallon; Color Red; Temperature Rating 40 to 122 Deg F (Application), -20 to 180 Deg F (Service); Application HVAC Duct and Vent, Metallic and Non-Metallic Pipe, Blank Opening, Single and Bundled Cable, Insulated Pipe, Pipe and Cable Through Penetration, Busway, Combo, Rated Wall, Floor and Floor Ceiling Assembly, Static Construction Joint; Applicable Standard UL, CAN/ULC S115, FM, ASTM E814/E1966, IBC, IRC, IFC, IPC, IMC, NEC, NFPA 70/101/5000; Physical State Solid; Physical Form Paste; pH Value 7.5 to 8; Boiling Point 100 Deg C; Evaporation Rate 0.33; Specific Gravity 1.35; Surface Burning Characteristic Flame Spread 0, Smoke Development 0; Hardness 45; Tensile Strength 85 PSI; Volume Shrinkage 28 Percent
- Tough and ready-to-use, 3M™ Fire Barrier Sealant CP 25WB+ is a high-performance, one-component, latex-based, intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. As penetrants are exposed to fire, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant CP 25WB+ to expand and help maintain a firestop penetration seal for up to 4 hours. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire when installed in accordance with a listed through-penetration or fire-resistive joint assembly system (STC-Rating of 54 when tested in a STC 54-rated wall assembly).