Epoxy Resins

Filter

Search Within Category

: 3M (1)
Adhesives Technology (1)
Deneef (3)
Euclid (18)
GCP (1)
Laticrete (4)
MasterEmaco (3)
MasterFlow (1)
MasterInject (1)
MasterSeal (3)
: Epoxy, Non-Sag (1)
Epoxy, Low Viscosity (1)
2-Component, Epoxy (1)
2-Component, Epoxy, Non-Sag (1)
2-Component, Epoxy, Injection Resin, Low Viscosity (1)
Epoxy, High Strength (1)
2-Component, Epoxy, High Strength, Structural (1)
2-Component, Epoxy, High Strength, Structural, Non-Abrasive, Smooth (1)
2-Component, Acrylate, Super Strength (1)
2-Component (3)
: ASTM C881-10 Types I, II, IV, and V, Grade 3, Class C, AASHTO 235 (1)
ASTM C881 Types I and IV, Grade 1, Class C, AASHTO M 235 (1)
ASTM C881/C882/C293/D638/D695/D648, AASHTO T-237, Type II, Grade 2, Class C (1)
ASTM C882/D638/D695/D648, AASHTO T-237 (1)
ASTM C881/C882/D2393/D570/D2566/D695/D648/D638/D790, AASHTOT T-237, Type I, II, IV, V, Grade 1, Class B and C (1)
ASTM C881/C882/D570/D638/D695/D732/D790, Type I/II/IV, Class C, AASHTO M-235 (1)
ASTM C881/C882/D648/D695, Type I/IV, Class C, Grade 3, AASHTO M-235 (1)
ASTM C881/C882/D638/D790, Type I/IV, Class C, Grade 3, AASHTO M-235 (1)
UL, ANSI/NSF 61, ICC-ES, IAPMO-UES (1)
ETA (1)
: Bonding of Concrete, Masonry, Steel, Wood, Anchoring Bolt, Dowel, Pin, Pick Proof Sealant for Jail/Prison and Kennel, Seal Crack and Set Port Prior to Injection (1)
Bonding of Concrete, Masonry, Wood, Anchoring Bolt, Dowel, Pin, Injection Resin for Cracked, Structural Substrate, Mix with Dried Silica Sand to Create a Repair Mortar, Gravity Feed Crack in Concrete Slab (1)
Interior and Exterior, Coating Rebar, Steel, Wood, Concrete, Grouting Bolt, Stone and Masonry (1)
Interior and Exterior, Horizontal, Vertical and Overhead Surface, Pinning Loose or Broken Masonry, Metal, Concrete, Stone, Plastic, Foam, Rubber, Fairing Uneven Surface, Filling Gap and Joint, Grouting Bolt and Dowel (1)
Interior and Exterior, Concrete, Grout, Anchoring Bolt, Dowel and Reinforcing Bar (1)
Horizontal Surface, Interior/Exterior, Bridge Deck, Steel Deck, Warehouse Floor, Elevated Airport Runway, Balcony, Concrete, Steel (2)
Exterior, Horizontal, Concrete, Bridge Deck, Parking Structure, Infrastructure (1)
Epoxy Mortar Repair, Window, Door, Lock-Up, School and Institution (1)
Concrete, Masonry, Wood (2)
Concrete, Masonry, Metal, Wood, Window, Door, Lock-Up (1)
: 300 Linear Foot (1/2 Inch x 1/2 Inch Joint) (1)
200 to 250 Square Foot per Gallon (1)
: Open Time 4 Hour at 50 Deg F/2 Hour at 77 Deg F/ 40 Minute at 105 Deg F, Full Cure Time 14 Day at 50 Deg F/7 Day at 77 Deg F/3 Day at 105 Deg F (1)
Open Time 3 Hour at 60 Deg F/90 Minute at 85 Deg F/ 40 Minute at 105 Deg F, Initial Cure Time 10 Day at 60 Deg F/6 Day at 85 Deg F/3 Day at 105 Deg F, Full Cure Time 20 Day at 60 Deg F/10 Day at 85 Deg F/7 Day at 105 Deg F (1)
3 Hour at 77 Deg F (Tack Free), 3 Day at 77 Deg F/6 Day at 40 Deg F (Full Cure) (1)
: Black (Part A), Black-Brown (Part B) (1)
Clear/Amber (1)
Gray (14)
Amber (1)
Yellow (2)
Clear (3)
Bronze (1)
Dark Gray (3)
Pale Yellow (1)
Clear (Part A), Amber (Part B) (5)
: Clear (1)
: 4000 to 4500 PSI at 24 Hour, 6500 to 7000 PSI at 7 Day (2)
7900 PSI (1)
10000 PSI at 1 Day, 12500 PSI at 7 Day (1)
12000 PSI (1)
12800 PSI (1)
7200 PSI (Mortar), 6000 PSI (Neat) (1)
10500 PSI (1)
7900 PSI (Mortar), 6100 PSI (Neat) (2)
15600 PSI (2)
13300 PSI (1)
: 2 Gallon Kit ( Part A and Part B) (1)
55 Gallon (2)
1 Gallon (9)
2 Gallon (5)
4 Gallon (12)
20 Fluid Ounce (1)
10 Gallon (6)
3 Gallon (10)
22 Ounce (3)
10.5 Ounce (1)
: 70 Pound (1)
5 Gallon (1)
1 Gallon (Part A), 1 Gallon (Part B) (1)
: Pail (4)
Bag (2)
Can (1)
Cartridge (12)
Kit (2)
Tote (1)
: Concrete Demolition Agent (1)
Duct Grout (1)
Injection Packer (1)
Nozzle (1)
Gelacryl Superflex (1)
Epoxy Bonding Agent (2)
Reinforcing Agent (1)
: Steel Stud (1)
: 17 Inch x 3.5 Inch x 13.5 Inch (1)
: 48 Inch Length x 16.25 Inch Width (1)
: 28 Day (2)
16 Hour (Recoat) (2)
2.5 Hour (Tack Free), 24 Hour (Traffic) (6)
2 Hour (Tack Free), 2.5 Hour (Traffic) (1)
4 Hour (Cure) (2)
14 to 16 Hour (Tack Free) (1)
: 17 Inch x 3.5 Inch x 12.5 Inch (1)
: 40 Deg F (1)
40 to 90 Deg F (Storage) (1)
40 to 95 Deg F (1)
40 to 104 Deg F (1)
40 to 95 Deg F (Storage) (4)
41 to 86 Deg F (Application), 40 to 95 Deg F (Storage) (2)
41 to 89 Deg F (Storage) (1)
: 50 to 105 Deg F (1)
60 to 105 Deg F (1)
40 to 100 Deg F (1)
40 to 95 Deg F (Storage) (7)
-40 to 122 Deg F (Service), 41 to 77 Deg F (Storage) (2)
50 to 77 Deg F (Storage) (2)
40 Deg F (Application), 40 to 95 Deg F (Storage) (3)
: 6525 PSI (2)
5700 PSI (3)
7250 PSI (1)
7000 PSI (2)
7775 PSI (1)
2400 PSI (Mortar), 2000 PSI (Neat) (1)
2300 PSI (2)
5000 PSI (1)
5078 PSI (1)
: 2-Component, Armor-Hard (1)
2-Component, Low Modulus, Low Viscosity, Moisture Tolerant, 100 Percent Solid (1)
Low VOC, 2-Component (1)
2-Component (4)
1-Component (1)
Epoxy (1)
2-Component, Moisture Tolerant, High Strength (1)
Multi-Purpose (1)
Rapid Setting, Skid Resistant, 2-Component (2)
2-Component, Moisture Tolerant (3)