Physical State Solid; Appearance Aluminum Foil Facer with Gray Butyl Adhesive; Service Temperature -20 to 180 Deg F; Tensile Strength 16 Pound per Inch (Minimum); Water Vapor Permeance Less than 0.1 Perms
Single Source System - Foil-Grip 1402 is an Essential Component of CCW's R2+ Polyiso Insulation System; Easy to Use - Convenient Size Roll and Simple Peel-and-Stick Installation over Wide Temperature Range without Primer; The Right Tape for the Job - Withstands Surface Heat Gain and UV Exposure Typical in the Installation
Wall Insulation; Length 100 Foot; Width 6 Inch; Thickness 17 Mil; Material Aluminum Foil (Facer), Modified Butyl (Adhesive); Temperature Rating 25 Deg F (Primer), 40 Deg F (without Primer); Color Gray (Adhesive); Application Duct Joint and General Purpose, Sheet Metal, Duct Board, Flex Board, PVC Coated Duct and Duct Wrap Vapor Barrier; Applicable Standard ASTM D882/D903/E84/E96B/G53, SCAQMD 1168, UL, LEED; Physical State Solid; Appearance Aluminum Foil Facer with Gray Butyl Adhesive; Service Temperature -20 to 180 Deg F; Tensile Strength 16 Pound per Inch (Minimum); Water Vapor Permeance Less than 0.1 Perms
CCW FOIL-GRIP 1402 is a 17-mil-thick pressure-sensitive flashing tape composed of an aluminum foil facer fully coated with a non-asphalt, modified butyl adhesive. The product is ideal for sealing board joints and brick-tie penetrations through CCW's R2+™ polyiso insulation and can be used in a similar manner over Insulfoam R-Tech® and XPS foam board insulation. The adhesive and facer composition of CCW FOIL-GRIP 1402 make this product ideal for use over insulation. The adhesive exhibits aggressive adhesion to the surface, while the foil facer provides excellent UV resistance and does not curl or wrinkle when subjected to typical solar heat gain. CCW FOIL-GRIP 1402 is provided in rolls cut to various widths. This flashing tape product is furnished with a release liner which is removed and discarded during installation.